Typical Boiler Water Parameters (Recommended Range)
Parameter Range (Low /High )
pH (Boiler Water) 9.0 – 9.5 10.5 – 11.5
Total Hardness Nil Nil
Dissolved Oxygen < 0.02 ppm < 0.005 ppm
Total Alkalinity 200 – 400 ppm Controlled via dosing
Conductivity 2000 – 3500 µS/cm < 100 µS/cm
Silica < 30 ppm < 0.02 ppm
✔ Scale deposition on heat transfer surfaces is effectively prevented through the product’s advanced formulation, thereby improving heat transfer efficiency.
✔ Furthermore, the chemical offers strong protection against oxygen corrosion in boiler tubes and feed lines to ensure smoother operation.
✔ Maintaining proper system balance is another key advantage, as it sustains optimum alkalinity levels throughout the boiler water.
✔ As a result, steam purity increases, and overall boiler performance shows noticeable improvement.
✔ In the long run, this treatment extends equipment life while significantly reducing downtime.
✔ Application: Suitable for use in feedwater tanks, feed lines, or boiler drum dosing systems.
✔ Dosage: Typically ranges from 100–200 ppm, depending on feedwater quality and operating conditions.
✔ Control: Regular monitoring of alkalinity, sulfite, and conductivity is recommended to maintain ideal water conditions.
In addition, using an automatic dosing system ensures consistent chemical feed and better boiler protection.
✔ Packaging: This product is available in 30 kg, 50 kg, and 200 kg HDPE drums.
✔ In terms of storage, keep the chemical between 5–40°C in its original sealed container.
✔ Additionally, it offers a minimum shelf life of 12 months when stored under recommended conditions.
Our Boiler Water Treatment Chemical is an advanced formulation developed to ensure optimum boiler performance, reliability, and long equipment life. It is specially designed to control scale, corrosion, sludge, oxygen, and foaming throughout the steam-water cycle.
As a result, your boiler system operates with improved efficiency and reduced maintenance costs.
